Mastering Anti-Recoil Scripts: Tuning for Every Meta Weapon

How to adjust vertical and horizontal recoil values, build weapon-specific presets, test properly, and avoid the mistakes that get people flagged or underperforming.

An anti-recoil script only works as well as its tuning. A generic, one-size-fits-all preset might feel fine on one weapon and completely wrong on another. This guide walks through how anti-recoil scripts actually work, how to tune them per weapon, and the testing habits that separate a script that feels natural from one that gets flagged for looking robotic.

How Anti-Recoil Scripts Work

When you fire a weapon, its recoil pattern pushes your aim up and sideways in a specific, repeatable way — every weapon has its own signature pattern. An anti-recoil script counters this by applying a small, continuous downward (and sometimes lateral) input while you're firing, offsetting the weapon's natural climb. The goal is to end up with a net result close to your original point of aim, not a perfectly rigid, locked-on-target lock.

Vertical vs Horizontal Values — What Each One Controls

• Vertical value – counters the upward climb of a weapon during sustained fire. This is usually the larger, more impactful value for most weapons.

• Horizontal value – counters lateral drift, which varies more by weapon — some guns barely drift sideways, others pull hard to one direction after a few rounds.

Weapons with a strong vertical pattern and minimal horizontal drift (many ARs) need most of your tuning attention on the vertical value. Weapons with unusual patterns (some SMGs, LMGs) often need more horizontal correction than players expect.

Building a Weapon-Specific Preset — Step by Step

1. Start with a light vertical value, well below what you think you'll need. Over-correcting from the start makes it hard to tell what's actually needed.

2. Fire test bursts in a private match or firing range, focusing purely on where your shots land compared to your original aim point.

3. Increase the vertical value in small increments, retesting after each change, until your shots land consistently near your point of aim rather than drifting up.

4. Once vertical feels right, repeat the same incremental process for horizontal drift if the weapon has noticeable lateral pull.

5. Test across different ranges (close, mid, long) — a value that feels right up close can feel too strong or too weak at distance.

6. Save the finished values as a named preset for that specific weapon, rather than reusing a generic profile across multiple guns.

Testing Methods That Actually Work

• Wall-spray test – fire a full magazine at a flat wall or target from a fixed position and observe the actual bullet spread pattern — this shows you exactly what the script is doing, without gameplay variables in the way.

• Controlled-range test – repeat the same test at close, mid, and long range to catch values that only feel right at one distance.

• Live-match feel test – after wall testing looks right, confirm it still feels natural in an actual match, since real engagements involve movement and target tracking that a static test can't replicate.

Common Mistakes That Get People Detected or Underperforming

• Over-tuning the value too high – produces an unnaturally rigid, perfectly straight spray pattern that looks mechanical rather than human — this is one of the most common patterns anti-cheat systems and reviewers look for.

• Reusing one preset across every weapon – different weapons have different recoil patterns, so a value tuned for one gun will often feel wrong, or look suspicious, on another.

• Never retesting after game updates – balance patches frequently adjust recoil patterns, and an old preset can suddenly feel too strong or too weak after a patch.

• Ignoring horizontal drift entirely – focusing only on vertical control while a weapon's horizontal drift goes unaddressed leads to inconsistent accuracy at range.

  

Frequently Asked Questions

How do I know if my anti-recoil value is too strong?

If your shots consistently land below your original point of aim, or the spray pattern looks unnaturally straight in a wall test, the value is likely too high — dial it back and retest.

Do I need a different preset for every attachment on the same weapon?

Major attachments that affect recoil (compensators, grips, barrels) can shift a weapon's pattern enough to warrant retesting, though minor cosmetic attachments usually don't require a separate preset.

How often should I retune my presets?

Whenever a game receives a significant balance patch or new season, it's worth re-running the wall-spray test on your most-used weapons to confirm the preset still matches the current recoil pattern.

Get a Pre-Tuned Starting Point

Every anti-recoil script in our library ships with weapon-specific presets already tuned through this same process, so you're never starting from a blank value. Browse our full script library to find a preset built for your main weapon.